S-CSA I 6x35 M8/M10x30 ZP Concrete Screw
ARTICLENUMBER9640071513
ETA-approved 6 mm concrete screw for cracked and non-cracked concrete
- Self-tapping, approved screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- ZP for dry indoor use.
Product overview
Packaging
Carton: 50 / Pack: 250 / Pallet: 14000Weight
32.7 gEAN
6416031715136Material
steelSurface
zinc-platedSuitable Conditions
Dry indoorApplications
- Pipe supports
- Installation channels
Base Material
Approved for
Cracked concrete
Hollow core slab
Non cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
36 mmDrill hole diameter (d0)
6 mmFixture thickness (tfix,1)
1 mmOuter drive
AF13Hole in fixture (df)
9 mmNominal setting depth (hnom,1)
35 mmEffective setting depth (hef,1)
27.6 mmDrill hole depth (h1,1)
45 mmHead diameter (dk)
14 mmInstallation torque max (Nm) (Tinst)
14Minimum base material thickness (hmin,1)
80 mmElectrical number (FI)
1324007HEPAC number (FI)
3255598Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 35 mm | 1,4 kN | ||
| Cracked concrete, C20/25 | VRec | 35 mm | 5,4 kN | ||
| Non cracked concrete, C20/25 | NRec | 35 mm | 1,4 kN | ||
| Non cracked concrete, C20/25 | VRec | 35 mm | 5,4 kN | ||
| Hollow core slab, bottom flange thickness 25 mm | NRec | 35 mm | 1,2 kN | ||
| Hollow core slab, bottom flange thickness 25 mm | VRec | 35 mm | 1,2 kN |