S-CSA I 6x35 M8/M10x30 ML Concrete Screw
ARTICLENUMBER9640071524
ML coated 6 mm inner thread concrete screw with ETA approval
- Self-tapping, approved screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- ML (Multi Layer) corrosion protection coating tested 2016 hours in SST acc. ISO 9227 and then fulfills the requirements for the neutral salt spray test with the corrosion class „C3 very high“ according to DIN EN ISO 12944-6:2018-06.
- For outdoor use in not safety relevant applications.
Product overview
Packaging
Carton: 50 / Pack: 250 / Pallet: 14000Weight
32.9 gEAN
6416031715242Material
steelSuitable Conditions
Dry indoor, Humid indoor, rural outdoor, OutdoorBase Material
Approved for
Non cracked concrete
Cracked concrete
Hollow core slab
Suitable for
Solid clay brick
Sand-lime
Technical Data
Length (L)
36 mmDrill hole diameter (d0)
6 mmFixture thickness (tfix,1)
1 mmOuter drive
AF13Hole in fixture (df)
9 mmNominal setting depth (hnom,1)
35 mmEffective setting depth (hef,1)
27.6 mmDrill hole depth (h1,1)
45 mmHead diameter (dk)
14 mmInstallation torque max (Nm) (Tinst)
14Minimum base material thickness (hmin,1)
80 mmElectrical number (FI)
1324243HEPAC number (FI)
3255755Approvals / Certificates
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 35 mm | 1,4 kN | ||
| Cracked concrete, C20/25 | VRec | 35 mm | 5,4 kN | ||
| Hollow core slab, bottom flange thickness 25 mm | NRec | 35 mm | 1,2 kN | ||
| Hollow core slab, bottom flange thickness 25 mm | VRec | 35 mm | 1,2 kN | ||
| Non cracked concrete, C20/25 | NRec | 35 mm | 1,4 kN | ||
| Non cracked concrete, C20/25 | VRec | 35 mm | 5,4 kN |